Atrix DVRY0803S Manuel d'utilisateur télécharger pdf (Page 29)

STANDALONE DVR USER MANUAL

IV Operations

This chapter descripts the operations for the 4ch, 8ch, and 16 ch DVR systems.

1 Power On

1) Startup

Press 【Power On/Off】 button to start the device, and the Power LED will light. Please refer to 2.6 Rear Panel

Connection for details of the connection method. A login box will appear on the screen. Please select proper user and type in

relevant password to login.

Note1:Ittakesabout60secondstobootuptheDVRsystem.

Note2:Modifypasswordbyselecng<ToolBar>→<System>→<SystemSeng>→<PasswordSeng>.Setasindicated,

newpasswordwilltakeeffectinstantly.

Note 3: Manufacture Default – Login ID <Admin>, password 888888; Login ID <User>, password is 666666. Admin

password canbe restored to factorydefaultsbyshort‐circuitthe “JP10” or “JP15” on main board. User passwor dcanbe

resetbyAdminbyIEin 【UserManagement】

Note4:IftheDVRhasnoHarddriveinstalled,ortheHarddriveconnectionisnotcorrect,buzzerwill soundand“NO

Harddisk”willappearonthescreen.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 77 78

Pas de commentaire

Atrix DVRY0803S Manuel d'utilisateur Page 29